Protect your surfaces from corrosion, spalling, efflorescence and freeze-thaw damage with our premium waterproofer.
最佳效果：
Make sure your surface is cleaned and prepped before applying the waterproofer.
For new or uncoated surfaces, refer to: Preparation of Uncoated Concrete for Sealers
For uncoated pavers, brick or natural stone, refer to: Preparation of Uncoated Pavers, Brick or Natural Stone
For coated concrete: refer to: Preparation of Coated Concrete for Sealers
Step 1
After the surface is cleaned and prepped, apply the BEHR PREMIUM® Protector and Waterproofer until the surface is saturated. Apply the product to a dry surface with a brush, roller or garden sprayer.
Step 2
Remove any puddles by spreading product to drier areas or by wiping off excess with a clean cloth.
Step 3
On vertical surfaces, apply the waterproofer from the bottom up and saturate thoroughly.
Step 4
Once dried, rough, vertical surface may be coated with an oil or latex-based paint or primer. DO NOT paint horizontal surfaces after applying this product.
Clean up with soap and water.
High Pressure Nozzle
正在计划重新装修您的住宅？
借助此便捷工具，在手机预览、匹配和调整色彩
别错过BEHR百色熊的最热产品和最新资讯
