Protect and beautify your concrete and masonry surfaces with this premium high gloss, wet-look sealer.
最佳效果：
Your surfaces must be properly cleaned and prepped before beginning.
For new or uncoated surfaces, refer to: Preparation of Uncoated Concrete for Sealers
For uncoated pavers, brick or natural stone, refer to: Preparation of Uncoated Pavers, Brick or Natural Stone
For coated concrete: refer to: Preparation of Coated Concrete for Sealers
Step 1
After the surface has been cleaned and prepped, apply a thin coat of BEHR PREMIUM® Wet-Look Sealer with either a nylon-polyester brush, 1/4"- 3/8" nap roller cover, high quality pad applicator, or a high quality pump sprayer with an adjustable tip.
Step 2
If the sealer is sprayed on, back roll for a uniform thickness. For added sheen and durability, additional coats (no more than 4) may be applied.
Step 3
The sealer will dry to the touch in 1 hour. Allow the first coat to dry for 4 hrs. before deciding if a second coat is needed.
Step 4
Be sure the surface is fully cured before use.
Allow 24 hours for light foot traffic.
Allow 72 hours for heavy foot traffic and furniture.
Allow 14 days before subjecting to automotive tires.
Allow 30 days before rinsing or cleaning with a mild detergent.
High Pressure Nozzle
正在计划重新装修您的住宅？
借助此便捷工具，在手机预览、匹配和调整色彩
别错过BEHR百色熊的最热产品和最新资讯
